K&N Aircharger Intake System for 2001-2016 Harley Davidsons

Since 1969, K&N has been perfecting the process of filtering the air that goes into motorcycle engines. Now, the company has released a new product that not only provides clean air for your engine to breathe, but looks great while doing it. Oh and it adds up to 6 horsepower. Not bad for a simple bolt-on kit.

The new systems from K&N are the 63-1134 and 63-1137 Aircharger intake systems. The 63-1134 fits 2008-2016 Harley Touring models, while the 63-1137 bolts onto 2001-2015 Harley Dyna and Softail models. Both kits include a cast aluminum intake tube and come in a textured black finish with a raised, brushed aluminum K&N logo. This styling exudes performance, while also providing a timeless design that would look good on any style of bike build. The kits feature an oversized, oiled cotton, clamp-on air filter that feeds air directly into a wide air tube with an integrated velocity stack. An integrated breather system ensures these kits are a direct replacement for your stock intake.

On the dyno, K&N saw an estimated 6 horsepower and 6.5 lb-ft of torque gain for the 63-1134 kit on a 2016 H-D Street Glide. The 63-1137 system made an estimated 5 horsepower and 8 lb-ft of torque on a 2016 Harley Switchback.

These kits will be unveiled at the Sturgis Motorcycle Rally, so if you will be in town, swing by the K&N booth. It will be located in the vendor area at Black Hills Harley Davidson.

+6-Inch Custom Springer Forks

Give your ride that “old school” look with a Drag Specialties +6-Inch Custom Springer Fork. These forks are an economical alternative to a shock-dampened type springer. They come fully assembled with an in-line top bracket without a built-in rake. They measure 37 inches from top bearing to axle and have a 1-inch outer diameter steering stem that is designed for Timken-type bearings. Both rear legs come threaded for right or left brakes. The forks require a wheel compatible with a ¾-inch outer diameter axle. The included ¾-inch outer diameter axle kit contains a brake mount pivot with thrust washer and hub spacers (custom spacers might be required depending on the wheel used). The forks measures 9¼ inches between the rockers and the riser mounts are on 4¾-inch centers and threaded ½-inch-20. These forks do no accept spotlight bars and have no fender mounts. They are available in chrome and black for 1984 to 2017 Big Twin and 1986 to 2003 XL models (except Dressers and Dyna Glides). The suggested retail price is $719.95 for black and $749.95 for chrome.