+6-Inch Custom Springer Forks
Give your ride that “old school” look with a Drag Specialties +6-Inch Custom Springer Fork. These forks are an economical alternative to a shock-dampened type springer. They come fully assembled with an in-line top bracket without a built-in rake. They measure 37 inches from top bearing to axle and have a 1-inch outer diameter steering stem that is designed for Timken-type bearings. Both rear legs come threaded for right or left brakes. The forks require a wheel compatible with a ¾-inch outer diameter axle. The included ¾-inch outer diameter axle kit contains a brake mount pivot with thrust washer and hub spacers (custom spacers might be required depending on the wheel used). The forks measures 9¼ inches between the rockers and the riser mounts are on 4¾-inch centers and threaded ½-inch-20. These forks do no accept spotlight bars and have no fender mounts. They are available in chrome and black for 1984 to 2017 Big Twin and 1986 to 2003 XL models (except Dressers and Dyna Glides). The suggested retail price is $719.95 for black and $749.95 for chrome.
Frame-Mounted Heat Deflectors
Make your ride cooler with Drag Specialties Frame-Mounted Heat Deflectors. These deflectors direct heat away from the rider to improve comfort on hot summer rides. They are easy to install with included hardware and mount to the frame just under the front of the seat. The deflectors are made from a tough plastic for durability and come in a black finish. They are available for 2008 to 2017 Softail models (except FXCW/C, FXSB/SE and FXSE, replacing OEM No. 29200008A) and sold in pairs with a suggested retail price of $92.95.
Center Stands
Make cleaning and servicing your bike easier with Drag Specialties Center Stands. These stands lift your bike upright for easier cleaning and servicing as well as take up less space when parking your bike. Adjustable feet allow the rear tire to be lifted off the ground and work with both original equipment (OE) and profile rear suspensions. With a bolt-on design, there is no loss of lean angle. These stands are available in chrome and black (replacing OEM No. 91573-09A) for 2009-2023 FLHT, FLHR, FLHX and FLTR models (except FLHTKSE, FLTRUSE and 2007-2011 FLHTCUSE). They are not for use on models with an adjustable passenger floorboard mount kit (OEM No. 50768-07). The suggested retail price is $219.95.
Freedom Touring Seat
The Freedom Touring seat features a 5¾-inch tall driver support with unique styling and is covered in high-quality automotive-grade vinyl. Seating area is contoured for maximum comfort and is made narrow up front for better leg clearance. This seat also works with our EZ Glide frame-mounted driver backrest receiver mechanism that accepts EZ Glide backrests. It will also work with Harley-Davidson and OE frame-mounted backrest mechanisms and backrest pads.
It is available in Smooth, Solar-Reflective Leather; Smooth Vinyl; and Double Diamond Stitch Vinyl with black, silver or red thread for 1997 to 2007 FLHT, FLHTC, FLHTCU, FLHR, FLHX and FLTR models. All mounting hardware is included, and FLHT and FLTR applications will use the included lower dash panel extension. It is made in the U.S. with a suggested retail price starting at $517.95.
Primary Chain Auto Adjuster Kits
Don’t worry about loose chains with the Drag Specialties Primary Chain Auto Adjuster Kits. Used for updating an old adjuster system or when building a new bike from the ground up, these kits include an adjuster plate, bolts, shoe, brackets and hardware. They are available for 2001 to 2006 FLHT, FLHR, FLHX, FLTR, FXST and FLST models and 2001 to 2005 FXD and FXDWG models for a suggested retail price of $55.95. They are also available for 1984 to 2000 FLHT, FLHR, FLTR, FXST and FLST models and 1991 to 2000 FXD and FXDWG models for a suggested retail price of $73.95.