Motion Pro Multi-Valve Tool
Chris Tyree, the service manager at Unique Powersports in Sullivan, Missouri, serves up the dish on the Motion Pro Multi-Valve Tool. Give us a buzz to score your FREE review tool, but act fast because we’ve only got room for a few tech testers!
Bikemaster ChargeMaster 365TD
The ChargeMaster 365TD gives riders peace of mind in chilly starting conditions. The triple mode, seven-stage charger bulk charges batteries quickly and works for all types of 12 volt batteries. Visit www.tuckerrocky.com to see the whole BikeMaster lineup or call TR at (800) 347-1010.
Park Tool Steering Race Removers
The Park Tool Head Race Remover makes head tube bearing race removal easy. The tool is pulled through the steering tube until the flared ends snap in behind the race. A blow on the tool head removes the race. The RT-2 fits most brands with 35-mm to 55-mm bearing races, and the RT-1 fits most
Tire Balls Multiple Air Cell Inflation System
Flat-proof your customer’s tires with the Tire Ball multiple air cell inflation system. The puncture of a Tire-Ball-inflated tire results in a single flat cell out of many, allowing most puncture situations to be ignored. Improve traction by running lower air pressure, thereby increasing the tires’ contact patch. Run the same plush low-pressure set up
A&E Hand Tools Spline Crankshaft Wrenches
A&E Hand Tools gives H-D techs a hand with their newest Kastar 6-Spline Crankshaft Wrench for use on 2007 Harley-Davidson Sportster and 2008 Buell model 6-spline engines, and the new 24-Spline Crankshaft Wrench for use on 2006 Dyna 24-spline engines. The reversible ratcheting wrenches are used for the rotation of the crankshaft and to check
Aerostich Self-Priming Siphoning Pump
Safely siphon fuel from any gas-powered device without getting a mouthful or lungful of dangerously deadly toxins in the process. Simply insert the self-priming end into any fuel-laden receptacle, and put the other end into the container/carrying case. A few up and down self-priming pump motions and you’ll be siphoning away. The handy stopper clip
CMP Piston Ring Compressor
Installing cylinders onto pistons has always been a tricky job. Quit pinching your fingers and catching rings by using this handy piston ring compressor. It does the tough job of holding the rings tight in the piston so you can easily slide the cylinder in place. The compressor has a flared side to allow it
Dennis Stubblefield Special Rotary Shaft Puller for Sea-Doo PWCs
If you’ve got a tricky job to do, chances are Dennis Stubblefield’s got the right tool. A case in point is this Special Rotary Shaft Puller for Sea-Doo PWCs. It fits most 580cc, 650cc, 720cc and 800cc engines, and a 6mm Thru Bolt is included. It’s made in the USA and is covered by a
Feuling Oil Pump Corp. Pressure Test Tool
This pressure test tool is a must for any Twin Cam engine builder. Bench test the camplate before installation, set the relief valve spring pressure to your desired pop off psi and assure the valve is seating and seals. The tool includes a regulator and a 100 psi pressure gauge, and it fits all Twin
Georges Garage Wrist Pin Removal and Installation Tool
George’s Wrist Pin Removal and Installation Tool eliminates hassles and damage caused by the removal of pins by tapping with a hammer and drift or similar tools. Developed specifically to press the pin in and out of virtually any Harley-Davidson piston, this $53.50 tool features red anodized handles that are CNC machined from the finest
Goodson Harley Head Plate
Goodson gets the job done with this universal application Harley Head Plate that fits Shovel, Sportster, Evolution, Twin Cam, V-Rod and Panheads. You can use it on a seat and guide machine and/or head resurfacer. This high-quality helper boasts steel construction and includes two riders for $399.99. A head stand is coming soon.
Great Neck Flexible Line Wrench
Straining to tighten and loosen nuts and bolts in crammed confines can be a real pain in the neck. This new Flexible Line Wrench from Great Neck relieves those stresses with its flexible wrench heads at both ends of the tool. Once the flexible head is angled to fit a particular fixture, the wrench’s straight