fbpx

Harley-Davidson Announces New Screamin’ Eagle Stage Kits

High-flow exhaust kits, performance cams, ultra-powerful Screamin’ Eagle engines and a comprehensive line of upgrades get you to peak exhilaration quickly and smoothly with the power to handle whatever comes.

The all-new Harley-Davidson Screamin’ Eagle products for your ride are here to keep the thrills rolling mile after mile. High-flow exhaust kits, performance cams, ultra-powerful Screamin’ Eagle engines and a comprehensive line of upgrades get you to peak exhilaration quickly and smoothly with the power to handle whatever comes.

SCREAMIN’ EAGLE MILWAUKEE-EIGHT ENGINE STAGE IV KIT 114CI TO 131CI FOR SELECT SOFTAIL MODELS

With the largest displacement of any Harley-Davidson Stage Kit, this 114/117CI to 131CI Stage IV Kit was designed to deliver maximum horsepower – all the way to the redline – available now for select Softail models. Packaged with patent-protected cylinder technology, it allows for the largest Harley-Davidson bolt-on engine upgrade to any Milwaukee-Eight motor.

The Stage IV Kit features new CNC-ported heads with 1mm bigger valves than the previous generation, and fully machined combustion chambers. Coupled with the kit’s high-lift SE8-517 cam, high compression pistons and a 64mm throttle body and intake manifold, this combination delivers a thrilling 135 ft.-lbs. of torque and 124 HP rear-wheel output when paired with Screamin’ Eagle Street Cannon Mufflers. It’s designed to run at high-end RPMs and provide a significant boost of torque from cruising speed. You’ll feel the difference as soon as you twist the throttle.

The Screamin’ Eagle 131 Stage IV Kit is eligible for Custom Coverage under the motorcycle’s factory 24-month vehicle limited warranty when dealer-installed by an authorized H-D Dealer within 60 days of vehicle purchase and is otherwise backed by a 12-month limited warranty.

Performance components include:

  • Screamin’ Eagle CNC Ported Cylinder Head with CNC machined chamber and 1mm larger valves than previous generation
  • 131 Stage IV Timer cover
  • SE8-517 High-Lift Cam
  • Forged 10.7:1 High Compression Pistons
  • Screamin’ Eagle High Performance Cam Bearing
  • Screamin’ Eagle High Performance Tappets
  • Screamin’ Eagle 4.31″ Steel Sleeve Cylinders
  • Screamin’ Eagle 64mm Throttle Body and Cast Manifold
  • Screamin’ Eagle High Flow Injectors (5.5 g/sec) 

Complete fitment information can be found on H-D.com.

SCREAMIN’ EAGLE MILWAUKEE-EIGHT ENGINE STAGE IV KIT – 107CI TO 128CI FOR SELECT SOFTAIL MODELS

This Stage IV Kit was designed to deliver maximum horsepower – all the way to the redline – available now for select Softail models and features new CNC-ported heads with 1mm bigger valves than the previous generation, and fully machined combustion chambers.

Coupled with the kit’s high-lift SE8-517 cam, high compression pistons and a 64mm throttle body and intake manifold, this combination delivers a thrilling 127 ft.-lbs. of torque and 124 HP rear-wheel output when paired with Screamin’ Eagle Street Cannon Mufflers. It’s designed to run at high-end RPMs and provide a significant boost of torque from cruising speed. You’ll feel the difference as soon as you twist the throttle.

The Screamin’ Eagle 128 Stage IV Kit is eligible for Custom Coverage under the motorcycle’s factory 24-month vehicle limited warranty when dealer-installed by an authorized H-D Dealer within 60 days of vehicle purchase and is otherwise backed by a 12-month limited warranty.

Performance components include:

  • Screamin’ Eagle CNC Ported Cylinder Head with CNC machined chamber and 1mm larger valves than previous generation
  • 128 Stage IV Timer cover
  • SE8-517 High-Lift Cam
  • Forged 10.7:1 High Compression Pistons
  • Screamin’ Eagle High Performance Cam Bearing
  • Screamin’ Eagle High Performance Tappets
  • Screamin’ Eagle 4.31″ Steel Sleeve Cylinders
  • Screamin’ Eagle 64mm Throttle Body and Cast Manifold
  • Screamin’ Eagle High Flow Injectors (5.5 g/sec)

Complete fitment information can be found on H-D.com

SCREAMIN’ EAGLE MILWAUKEE-EIGHT ENGINE STAGE III 114CI OR 117CI TO 122CI KIT AND STAGE III 107CI TO 119CI FOR MY17+ TOURING MODELS

This Stage III kit has been developed for the rider looking for a solid “seat of the pants” torque increase you can feel every time you roll on the throttle. The bump up in displacement and compression deliver a significant increase in torque and power over stock, all the while restoring the sensation of riding solo when you’re loaded down.

The Stage III 107CI to 119CI upgrade delivers up to 23% more horsepower and 17% more torque and the 114CI to 122CI upgrade increases power by up to 15% and 13% more torque when compared to the Original Equipment engine configurations.

 Performance components include:

  • Screamin’ Eagle 4.155 Big Bore Bolt-On Cylinders
  • Forged 11.0:1 High-Compression Pistons and Rings
  • Screamin’ Eagle SE8-447 Torque Cam
  • Screamin’ Eagle High Capacity Tappets
  • Screamin’ Eagle High Performance Cam Bearing
  • Screamin’ Eagle Stage III Timer Cover & Insert
  • Multi-layer coated Head Gaskets
  • Cylinder Base and Cam Cover Gaskets
  • Most necessary gaskets and seals

Screamin’ Eagle Milwaukee-Eight Engine Stage III 114CI or 117CI to 122CI Kit is eligible for Custom Coverage under the motorcycle’s factory 24-month vehicle limited warranty when dealer-installed by an authorized H-D Dealer within 60 days of vehicle purchase and is otherwise backed by a 12-month limited warranty.

Stage III and IV Kits comply with noise and emissions standards in all U.S. states other than California on 2017-later Touring Models and select 2018-later Softail Models. Street-compliant statements may not apply to markets outside the United States. The 131CI Stage IV Kit fits ’17-later Touring models equipped with Milwaukee-Eight® 114CI or 117CI engine and ’18-later Softail models equipped with Milwaukee-Eight 114CI engine. The 128CI Stage IV Kit fits ’17-later Touring models equipped with Milwaukee-Eight® 107CI engine and ’18-later Softail models equipped with Milwaukee-Eight® 107CI engine. Neither kits fit Trike models. ’17-’19 models require separate purchase of High-Capacity Oil Pump P/N 62400248. 17-’18 models require separate purchase of Screamin’ Eagle High-Capacity Clutch Plate Kit P/N 37000258. All models require additional purchase of ECM recalibration with the Screamin’ Eagle Pro Street Tuner for proper installation.

Link: Harley-Davidson

You May Also Like

Introducing Rekluse’s All-New Manual APEX Clutch System for Harley Models

This clutch system is the result of Rekluse’s commitment to filling a void in the V-twin clutch market.

Rekluse APEX clutch system

Rekluse, a manufacturer of performance clutch systems for motorcycles and a brand under the Race Winning Brands (RWB) umbrella, has announced the launch of its all-new, manual clutch system for the V-twin market: APEX. This clutch system is the result of Rekluse’s commitment to filling a void in the V-twin clutch market with a product that offers a wide variety of riders elevated performance and durability with a lighter clutch lever pull, capable of servicing Big Twin engines from stock to high-performance builds.

Brembo’s New GP4-MotoGP Brake Caliper

Brembo’s GP4-MotoGP is a brake caliper born from the racetrack for the road, and it perfectly suits the needs of today’s motorcycles.

Zero Motorcycles Launches Tesla Tap Mini: the Key to Expanded Charging Options

The accessory expands rider access to more than 40,000 additional charging destinations across the country.

Tesla Tap Mini
Dymag and Roland Sands Develop State-of-the-Art Sector Race Wheels

Engineered for both track and road, the wheels have been honed to deliver enhanced performance, acceleration, handling and braking.

Sector Race Wheels
Drag Specialties April Product Releases

Products include forks, heat deflectors, stands, touring seats and primary chain auto adjuster kits.

Other Posts

2024 Harley-Davidson Homecoming Festival Kicks Off in 100 Days

Tickets are on sale for Veterans Park headliners Red Hot Chili Peppers, Jelly Roll and HARDY.

Nitro Circus, Harley-Davidson Homecoming
Sawicki Speed Introduces New Carbon Fiber Accessories for Milwaukee-Eight Softail Lineup

The new carbon fiber parts are made in-house and offer riders lightweight statement pieces for their motorcycles.

Carbon Fiber Accessories, Harley-Davidson Milwaukee-Eight Softail
WME: True High-Performance Shocks for the H-D FXR     

The WME also features stepless five-position rebound adjustment and fine threaded preload tuning.

WME shocks
All-New Honda Pioneer Heat Control Kits

Block heat and make riding in your 2022-and-up Pioneer cool and comfortable!.

2022-2024 Honda Pioneer Heat Control Kit