MotoPressor Pocket Pump
The MotoPressor Pocket Pump pumps the motorcycle’s front tire from flat to around 32 psi and the rear to around 28 psi in two minutes. It features an ultra compact design, weighing in at just 20 ounces. It includes a 25-inch long inflator hose with a hands-free, lock-down delivery valve that fits all bikes.
BikeMaster Bearing Removal Kit
This bearing removal kit comes with collets in the most popular sizes: 8-, 10-, 12-, 15-, 17-, 20-, 25- and 30-millimeter. Each kit comes complete with a slide hammer, and comes in a durable plastic storage and carrying case.
Cardo Scala Rider Q1
The new Scala Rider Q1 features TeamSet, which allows both the rider and passenger to listen to the same song from a smartphone or any other A2DP source. Other features include A2DP Bluetooth connectivity, a built-in FM radio with RDS, voice activation, a fully waterproof/dustproof housing and Cardo’s unique click-to-link paring.
Yamaha PW3028 Pressure Washer
This 3,000 PSI pressure washer has 2.8 gallons per minute of flow for cleaning requirements frequent users demand, combined with unique features such as a five-in-one nozzle tip, a fold-flat handle for storage and maintenance-free, non-pneumatic wheels to handle any terrain.
iON Adventure POV Camera
The iON Adventure point-of-view (POV) camera captures 1080p HD video as well as location, speed, acceleration and altitude using a built-in GPS receiver, with a unique ultra-sensitive light sensor. Weighing just 4.2 ounces, the camera is easy to use, with a large record button at one end of the camera and camera controls on the opposite end.
Chicago Pneumatic CP7769 Series 3/4-Inch Impact Wrench
The new CP7769 Series 3/4-inch Impact Wrench from Chicago Pneumatic is the only 3/4-inch impact wrench to offer side-to-side, single-hand, forward/reverse switching for improved efficiency and customer comfort. The CP7769 series is designed for a variety of maintenance applications, including heavy vehicle mechanical repair and maintenance repair operations.
Goodson Solid Carbide Valve Guide Reamers
These reamers feature a longer pilot area and multi-fluted design for perfect guide sizing. Goodson recommends using these reamers at 300 to 400 rpm with Bronze Reaming Oil for best results. At the recommended speed, it should take three to five seconds to ream one guide.
Paughco Sprocket Shaft Bearing Tool
This tool, designed for 1955 and later Big Twins, allows you to pull the crankshaft through the Timkin bearing with precise accuracy. It is manufactured from heat-treated tempered steel.
Drag Specialties Battery Lift Tool
The Battery Lift Tool was designed to work on touring models and other bikes where the battery is removed vertically. It allows the user to easily remove and install a battery without the worry of damaging their bike or injuring themselves. This tool grips the battery in the case seam on each end and works on most sealed brands.
Snap-On Blue-Point XL Air Hammer Drift Set
The Blue-Point XL Air Hammer Drift Set was designed specifically for suspension work to remove hard-to-reach bolts and pins that have been rusted over time. Providing the strength and force of an air hammer, the set is composed of a 5-inch long shaft design that will not get caught in deep holes.
ContourROAM 2 Camera
The ContourROAM 2 HD video camera features a locking Instant On-Record switch and a lightweight, low-profile design. It works up to one meter underwater without an extra waterproof case. It has a 270-degree flush-front rotating lens that, when coupled with the proper mount, offers endless video angle possibilities.
Contour+2 Camera
The Contour+2 escalates adventure video capabilities by letting your rider capture and share 1080p HD video with speed, distance traveled and elevation. It offers higher-quality video and includes a 60-meter waterproof case for underwater adventures. Users also have the ability to adjust white balance, contrast, sharpness, exposure, and metering.