The Yamaha YZ250F/YZ450Fs are great bikes, but the general consensus is that the cockpit (rider triangle) is a little cramped. The distance from seat to pegs is shorter than other bikes, which requires more effort to transition from sitting to standing. Works Connection’s Titanium Offset Foot Peg Mounts open up the cockpit area by moving the pegs down (7 millimeters) and back (5 millimeters). These very calculated measurements open up the cockpit while still allowing a good feel for the rear brake pedal and shift lever.
The kit consists of two titanium foot peg mounts (left and right), two titanium pins, two titanium washers and two cotter pins.
Works Connections enlisted the help of veteran test rider Kris Keefer to test various different offsets to come up with what he felt was the best setup. The amount to offset the mounts was the key to figuring out a better feel, more comfort and a less cramped feel.
You can use any foot peg you prefer with these foot peg mounts — stock/original equipment manufacturer (OEM) or aftermarket.
Another benefit of these titanium mounts is that they are 30% lighter than stock mounts.
Works Connection paid close attention to ground clearance on the mounts, and even though the mounts are lower, the ground clearance is the same as the stock mounts.
Features
- Made from Grade 5 6AL-4V titanium
- Lowers pegs by 7 millimeters and moves pegs back or rearward by 5 millimeters
- Manufactured with tighter tolerances than OEM parts
- Opens up rider triangle and makes it easier going from sitting to standing
- 30% lighter than OEM mounts
- Use any pegs you like with these mounts
- Laser engraved logos
- Retail: $349.95
- Part No. 20-500
Contact your retailer or visit worksconnection.com
