fbpx

Vapor Block Fuel Line Sleeve 

Vapor Block solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation.

Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block. Vapor Block fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block around the line, remove the adhesive liner, and press the adhesive flap into place. Vapor Block offers excellent long-lasting thermal protection without paying for expensive repairs or modifications. Available in 5/8-inch (#10669), 3/8-inch (#10671) and 1-inch (#10672) sizes.

You May Also Like

Drag Specialties Quick Connect Braided Upper Clutch Cables

Without the need to drain transmission fluid, you can significantly reduce installation time.

upper clutch cable

Quickly and efficiently replace the original-equipment (OE) upper clutch cable with a quick connect upper braided cable from Drag Specialties. The cable easily and quickly connects to the OE lower clutch cable section to significantly reduce installation time; there's no need to drain the transmission fluid. Cables also come pre-lubricated for smooth, consistent, long-lasting action. The design meets or exceeds the OE specifications, and the OE cable cover and housing can be re-used. Available with stainless steel, black/chrome or black/black cable housing and fittings in stock or alternate cable lengths for 2021 to 2022 FL touring models and 2018 to 2022 Softails with a cable-operated clutch. Suggested retail is $81.95 to $104.95 and the cables are made in the U.S.

Drag Specialties Switch Housing Kit Without Switches

A chrome finish and radiused edges add style.

Switch housing kits
GNX 4.5-Inch Slip-on Mufflers for Twin-Cam Touring Bikes

S&S is finally adding twin-cam fitment to the rowdy GNX slip-on line.

Twin-cam slip on exhaust
S&S Slip-on Exhaust for Indian Chieftain and Challenger

Finally, something for Indian models!

Indian, slip-on exhaust
Drag Specialties Oil Extractor

For clean and easy removal of fluids.

oil extractor

Other Posts

Drag Specialties Ignition Switch Kit

Different kits are available for 1994 to 2011 and 2007 to 2011 models.

ignition switch kit
Drag Specialties King Tour Box Pad

These pads work with Harley-Davidson King Tour-Paks and Drag Specialties Tour Box.

King tour box pad
Drag Specialties Brake/Mechanical Clutch Control Kits

The kit includes a single-disc master cylinder assembly.

Brake/Mechanical clutch control kit
Drag Specialties Chrome Rear Axle Kit

The axle is made of chrome-moly steel.

rear axle kit