fbpx
On the Throttle Ep. 8: The Season of Thanks

There’s so much to be thankful for: new bikes, racing news, museum exhibits and more.

On the Throttle
Project X Ep. 11: Attending to the Drivetrain

We’ve done a ton of work on the Project X ATV at this point, and the end of the rebuild is so close we can taste it. However, all of that work we’ve shown you in prior episodes doesn’t mean anything if the vehicle’s drivetrain isn’t in proper order. In this episode, Josh gets into

Project X Ep. 10: New Wheel Bearings & Spacers

Josh shows you the proper way to replace the wheel bearing on a Sportsman 800, and adds wheel spacers for a more aggressive stance.

Project X Ep. 9: Replacing the Seat & Grips

This episode covers the replacement of wearable items such as the seat cover and handlebar grips.

Project X Ep. 8: Fuel and Throttle

Ever try and turnover your vehicle and it won’t? In this episode of Project X, Josh walks you through the fuel system and ways to solve startup issues.

Project X E7: Installing a Winch

In this episode of Project X, Josh shows how to properly install a winch from Bronco ATV-UTV Components. The kit comes with everything needed to install it from the wiring to the brackets and winch itself. Bronco has made it a simple as possible so even a DIY’er could do it. The wiring is all

Project X E1: Revitalization

In our multi-episode series, video editor and garage guru, Josh Troche, takes a weathered Polaris Sportsman 800 and brings it back to life with new parts provided by Bronco ATV & UTV. We will be replacing everything from tie-rod ends to pistons and cylinders and show you how it is all done. Be sure to