FEULING OIL COOLED oiling system kits combine all the needed components to finish Milwaukee Eight engines oiling system under one part number. Available in HP+ or RACE SERIES kits, FEULING oiling system kits increase oil pressure, oil volume, engine oil flow and return oil scavenging.
The kits promote quieter and smoother engine operation, 27 percent more pressure and scavenge gear volume over stock; 42 percent more scavenge volume through port sizing, matched passages and holes to the engine case; 68 percent more oil volume to the crankshaft and connecting rod bearing; 15-25 degree cooler engine temperatures; 15-30 degree cooler oil temperatures; 10-30 more PSI of oil pressure; and reduces wet sumping, blow by and oily air cleaners.
Both HP+ and RACE SERIES kits include FEULINGS HIGH FLOW billet camplate made from 7075 aluminum which is 50 percent harder and stronger than the factory or Feuling OE+ camplates. FEULING increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the camplate to the port holes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings.
The FEULING oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi. The increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function. The FEULING oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems.
Link: FEULING