Colby Valve has developed a number of new valve stem replacement options for the powersport industry. Most powersport enthusiasts have experienced a broken valve stem while out on a trail. A broken valve stem typically puts a halt to any off-road activities, cutting a ride short.
The Colby Valve was invented to keep ATV and UTV users going. The valves are made from solid brass bar stock, and fit any .453˝ size hole. This means that a Colby Valve will fit anything from an ATV to an off-roading Jeep. Colby Valves are 20x stronger than standard valve stems, install from outside of the wheel, and are made in the USA.
The Emergency Valve requires no tools for installation and the “winged spacer” design makes tightening the valve as easy as twisting a wing nut. It takes less than a minute to fix what would usually end a day of riding.
The Colby Valve Ultimate Valve is more permanent solution that is a full 1/2 inch shorter than the regular valve. The shorter profile decreases the likelihood of contacting hazards on the trail and breaking off. Unlike the Emergency Valve, the Ultimate requires a 7/16˝ socket or wrench to install.