CVT Transmissions for ATVs

The continually variable transmission, or CVT, is a common component in the powersports industry. This is the transmission that has given scooters and snowmobiles the ability to be gas and go for decades. The CVT has also found a home in ATVs.

Providing the ‘GO’ for Powersports

TT_Screen-Shot-2016-03-07-at-2.29.07-PMThe continually variable transmission, or CVT, is a common component in the powersports industry. This is the transmission that has given scooters and snowmobiles the ability to be gas and go for decades. The CVT has also found a home in ATVs where a simple automatic transmission is desired.

1. The vast majority of CVTs, on the road and off, are of the variable diameter pulley type. This consists of two sets of pulleys connected by a stiff rubber belt. The inside of the two pulley faces form a v-shape. The gear ratio is changed by moving the two faces of one pulley closer together and the two faces of the other pulley farther apart. Due to the v-shaped cross section of the belt, this causes the belt to ride higher on one pulley and lower on the other. This changes the effective diameters of the pulleys, which in turn changes the ratio. The distance between the pulleys does not change, and neither does the length of the belt, so changing the ratio means both pulleys must be adjusted (one bigger, the other smaller) simultaneously in order to maintain the proper amount of tension on the belt.

2. In every system of this type there will be a drive and driven pulley. The drive pulley is the pulley that receives power from the crankshaft. The power is then transmitted via the rubber belt to the driven pulley. The drive pulley delivers this power to a final drive in a scooter or a sub-transmission in an ATV. There will be a centrifugal clutch either before the drive pulley or after the driven pulley to allow the spinning engine to be disconnected from the wheel(s) when stopped.

3. ŽAt idle, the drive pulley will be held open with a spring creating the minimum diameter for the belt. At the same time, a spring will hold the driven pulley closed creating the maximum diameter for the belt. This is the “low gear” of the CVT. As power is applied a variator mechanism, often just a ramp with roller weights, will cause the drive pulley ramp to close. This increases the diameter of the drive pulley and forces the driven pulley to open and reduce its diameter. This lowers the ratio simulating a higher “gear.”
Some variable diameter pulley CVTs are more complicated than others with engine brake controllers and electronically controlled ratios, but some basic maintenance tips apply to all.

4. The belt condition is important. If the belt is fraying it must be replaced. The slack or deflection of the belt cannot be adjusted like a motorcycle drive chain. The belt must be replaced if the deflection is out of specification.

5. Most belts are unidirectional. The belt must be installed to rotate in the correct direction.


6. The pulley’s faces and belt must be clean. If any substance, especially oil or grease, has contaminated the belt or pulley faces the CVT will not function correctly. Wear clean gloves when handling the belt and pulley faces. The pulley faces must be free of damage and excessive wear. If the pulleys are scratched or warped they should be replaced.

You May Also Like

Motorcycle Sales and Technology Trends for 2022

Supply shortages mean less tech, although motorcycles still have plenty of new features.

motorcycle, technology

As we enter into 2022, we look forward to a new year of unique opportunities, breakthrough technology and — with any luck — an upswing in market. These past two years have been hard for many people. Simply put, the pandemic changed the way a lot of us looked at our jobs, our spending habits and even our definition of “happy.” So, how about we take a look at what we see on the horizon?

Important Maintenance Checks for Motorcycle Storage

From the fuel and lube to the battery and tires, learn how you can keep your bike from corroding during the cold season.

battery, battery charger, maintenance
How to Properly Dispose of Motor Oil

Did you know that one gallon of motor oil can contaminate a million gallons of water if poured into a storm drain?

oil, motor oil, quick lube
Prepping Your Snowmobile for the Season

Get your snowmobile in shape this fall before hitting the trails.

Should You Change PWC Oil Before Winter Storage or After?

While the oil filter works hard all season, changing the oil is the only way to remove residual acids and moisture left in the crankcase.

Other Posts

Motorcycle and Powersport Lubricant Technology

When an oil is engineered for any application, it all starts with a base oil. The base oil is then blended with additives for a specific use and the formulated oil is packaged and distributed for sale to consumers.

Can You Use Regular Oil in a Motorcycle?

Motorcycle engines and automobile engines function differently, and the lubricants that service them have different needs.

Is Oil Filter Replacement Needed Every Time?

Some will think it is fine to just change the oil and not replace the filter. Is it ok?

Gravity and Vacuum Fuel Delivery Systems

Troubleshooting a gravity and vacuum fuel delivery system always starts with the same two basic items. Is fuel in the tank, and is the fuel filter in good condition?